Banner WORLD-BEAM QS30 Clear Object Sensor Manual do Utilizador descarregar pdf (Página 3)

P/N 139760 rev. A 3

Banner Engineering Corp.•Minneapolis,MNU.S.A

www.bannerengineering.com•Tel:763.544.3164

WORLD-BEAM

QS30ELVC Series

Applications

Clear Bottle or Object Detection

1. Mount the retroreﬂector.

2. Align the sensor to the retroreﬂector.

3.PerformLightSET(page4)withnoobjectpresent.

4.UsingSwitchpointAdjustment(page6),selectthedarkestswitchpointwhichreliablydetects

the object. Medium level (16% below the signal from the retroreﬂector) will work for most

applications. Dark level will provide more robust detection under difﬁcult environmental

conditions (e.g. dust, vibration, etc).

Clear Bottle or Object Counting

1. Mount the retroreﬂector.

2. Align the sensor to the retroreﬂector.

3. Disable the auto compensation function. Allow for 10 minute sensor warm-up period.

4.Positionthebottlesorobjectssothebeamispassingthroughthegapbetweenthebottles.

5.PerformLightSET(page4)onthegapcondition.

6. Using Switchpoint Adjustment (page 6), select the darkest switchpoint which reliably detects

the object. Medium level (16% below the signal from the retroreﬂector) will work for most

applications. Dark level may provide more robust detection under difﬁcult environmental

conditions (e.g. dust, vibration, etc).

Reﬂective Object Detection

1. Mount the retroreﬂector.

2. Align the sensor to the retroreﬂector.

3.PerformLightSET(page4)withnoobjectpresent.

4.UsingSwitchpointAdjustment(page6),selectclearormediumswitchpointpercentage(8%

or 16% below the signal from the retroreﬂector). This will reduce the chance of specular

reﬂection affecting the sensor.

1 2 3 4 5 6 7 8 ... 11 12

Sem comentários

Banner WORLD-BEAM QS30 Clear Object Sensor Manual do Utilizador Página 3