Banner A-GAGE High-Resolution MINI-ARRAY Series Manual do Utilizador descarregar pdf (Página 12)

P/N64118rev.B

Installation and Mechanical Alignment

Banner Engineering Corp. •Minneapolis,U.S.A.

www.bannerengineering.com•Tel:763.544.3164

3. Installation and Mechanical Alignment

3.1 Emitter and Receiver Mounting

BannerMINI-ARRAYemittersandreceiversaresmall,lightweight,andeasytohandle

duringmounting.Themountingbrackets(supplied)allow±30°rotation.

Fromacommonpointofreference,makemeasurementstolocatetheemitterand

receiverinthesameplanewiththeirmidpointsdirectlyoppositeeachother.Mountthe

emitterandreceiverbracketsusingthevibrationisolatorsandM4Kepsnuts(all

supplied).SeeFigure3-1.StandardM4or#8-32boltsmaybesubstituted(andthe

vibrationisolatorseliminated)insituationswheretheemitterandreceiverarenot

subjectedtoshockorvibrationforces.Whiletheinternalcircuitsoftheemitterand

receiverareabletowithstandheavyimpulseforces,thevibrationisolatorsdampen

impulseforcesandpreventpossibledamageduetoresonantvibrationoftheemitteror

receiverassembly.

Figure 3-1. A-GAGE High-Resolution MINI-ARRAY emitter and receiver mounting hardware

Mounting

Surface

M4 Keps

Nut (8)

M4 x 10 mm

Slotted Hex Head

with Com pres sion

Washer (2)

Mounting

Bracket

Emitter or

receiver

Anti-Vibration

Mount (4)

Mounting

Bracket

Washer

Nut

Studs: M4 x 0.7

9.5 mm (0.38") long

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 39 40

Sem comentários

Banner A-GAGE High-Resolution MINI-ARRAY Series Manual do Utilizador Página 12